Home > Production Related Parts > Processing Aids
Sort By:
Page of 2
Silicone Anti-Stick, Stoner® M520 ZIP-SLIP® (Quart) - KC5652-QT
Silicone Anti-Stick, Stoner® M520 ZIP-SLIP® (Quart) - KC5652-QT
$58.53

Stoner® M520 ZIP-SLIP® will help you save time, money and improve part quality. ZIP-SLIP® is an excellent preventative maintenance product when applied to the parting line of the mold. ZIP-SLIP® will help eliminate unwanted build-up of resin on the parting line that can cause gaps, leaks, messes, increased equipment maintenance and clean up time. ZIP-SLIP® improves efficiencies by maintaining a tighter seal on the parting line, it helps eliminate pinholes, voids, and blowholes.

M520 ZIP-SLIP® ADVANTAGES:
Eliminate unwanted build-up of resin on the parting line.
Maintain tighter seal of mold, reducing leaks and messes.
Improves part appearance and reduces defects caused by gaps in the parting line.
Save time on equipment maintenance and clean up.
Colorless and non-staining.
more info
Grease, High Temperature, KC6450
Grease, High Temperature, KC6450
$59.00

High Temperature Grease XL-0715. For use with multiple piece tools, slide rail mechanisms and retractable core pins. +750 degrees F. working temperature.

13 ounce tube.

Exceptional thermal stability, very high EP additives, superior rust protection, low volatility, non- dripping, non-carbonizing, water poof.
more info
Mold Coating, Stoner® TraSys 4000 RotoFlow (Case 12Pk.) - KC5669
Mold Coating, Stoner® TraSys 4000 RotoFlow (Case 12Pk.) - KC5669
$115.50

TraSys® 4000 RotoFlow is a mold coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational molds. RotoFlow helps fill in voids around inserts, tight radii, threads, and deep cavities.
RotoFlowTM removes pinholes on the surface of rotomolded polyolefin, nylon and crosslinked parts. It reduces bridging, thinning, blowholes, and static lines.

10.5 oz. a can
12 cans in a case
more info
Mold Coating, Stoner® RotoFlow® WB400, (Case 12Pk.) - KC5651
Mold Coating, Stoner® RotoFlow® WB400, (Case 12Pk.) - KC5651
$143.00

This is a water based mold coating that facilitates the flow of polyolefin and nylon resin into hard to fill areas of rotational molds. This product helps fill in voids around inserts, tight radii, threads, and deep cavities. A great preventative of pinholes on the surface of rotomolded polyolefin, nylon, and crosslinked parts. It prevents bridging, thinning, blowholes, and static lines.

13oz. Cans
Sold in a case of 12 cans.
more info
Mold Coating, Stoner® RotoFlow® WB400, 5 Liter Bottle - KC56515L
Mold Coating, Stoner® RotoFlow® WB400, 5 Liter Bottle - KC56515L
$170.00

This is a water based mold coating that facilitates the flow of polyolefin and nylon resin into hard to fill areas of rotational molds. This product helps fill in voids around inserts, tight radii, threads, and deep cavities. A great preventative of pinholes on the surface of rotomolded polyolefin, nylon, and crosslinked parts. It prevents bridging, thinning, blowholes, and static lines. more info
Gas Transfer Assembly, KC6770
Gas Transfer Assembly, KC6770
$185.90

Gas Transfer Assembly.

Often it is necessary to have an air line across the parting line. Our Gas Transfer Assembly eliminates the need to disconnect and re-connect your air lines. This Gas Transfer Assembly will do the work of connecting and disconnecting your air lines for you each time the mold is open or closed.

Price does not include stainless braided hose with 2 male fittings - 12'' length - $25.47.
Each additional inch - $.55.
more info
Silicone Anti-Stick, Stoner® M520 ZIP-SLIP® ( 1 Gallon) - KC5652-GA
Silicone Anti-Stick, Stoner® M520 ZIP-SLIP® ( 1 Gallon) - KC5652-GA
$193.65

Stoner® M520 ZIP-SLIP® will help you save time, money and improve part quality. ZIP-SLIP® is an excellent preventative maintenance product when applied to the parting line of the mold. ZIP-SLIP® will help eliminate unwanted build-up of resin on the parting line that can cause gaps, leaks, messes, increased equipment maintenance and clean up time. ZIP-SLIP® improves efficiencies by maintaining a tighter seal on the parting line, it helps eliminate pinholes, voids, and blowholes.

M520 ZIP-SLIP® ADVANTAGES:
Eliminate unwanted build-up of resin on the parting line.
Maintain tighter seal of mold, reducing leaks and messes.
Improves part appearance and reduces defects caused by gaps in the parting line.
Save time on equipment maintenance and clean up.
Colorless and non-staining

1 Gallon.
more info
Fiber Insulation Mat-Self Adhesive, KC6400
Fiber Insulation Mat-Self Adhesive, KC6400
$212.91

Part Number: KC6400 - (Size: 1600 X 1000 X 3mm). Glass Fiber Insulation Mat is a Self-Adhesive material that is very efficient and easy to use as an insulator on the exterior of a mold wall to prevent the build-up of resin in unwanted areas of a plastic part. It is easily cut with a knife to the desired size and shape and has a self- adhering feature that facilitates simple installation on the mold.

The reflective aluminum sheet and high thermal insulation quality of the glass fiber material make it the most efficient heat barrier available for the rotational molding process. The thermal resistance (R) of the 3mm sheet is ≈ 0.1 (this is generally measured in m²K/W)

This system works excellent when cooling with air.

NOTE: It is not recommended for water spray cooling. Glass Fiber Insulation Mats are available from RotoMart in the following sizes: 1600 X 1000 X 7mm -Part Number KC6401, 1600 X 1000 X 12mm - Part Number KC6402.


more info
Fiber Insulation Mat-Self Adhesive. KC6401
Fiber Insulation Mat-Self Adhesive. KC6401
$225.80

Part Number KC601 (Size: 1600 X 1000 X 7mm). Glass Fiber Insulation Mat is a Self-Adhesive material that is very efficient and easy to use as an insulator on the exterior of a mold wall to prevent the build-up of resin in unwanted areas of a plastic part. It is easily cut with a knife to the desired size and shape and has a self-adhering feature that facilitates simple installation on the mold.

The reflective aluminum sheet and high thermal insulation quality of the glass fiber material make it the most efficient heat barrier available for the rotational molding process. The thermal resistance (R) of the 7m sheet is ≈ 0.2 (this is generally measured in m²K/W)

This system works excellent when cooling with air.

NOTE: It is not recommended for water spray cooling. Glass Fiber Insulation Mats are available from RotoMart in the following sizes: 1600 X 1000 X 3mm - Part Number KC6400, 1600 X 1000 X 12mm - Part Number KC6402.


more info
Fiber Insulation Mat-Self Adhesive, KC6402
Fiber Insulation Mat-Self Adhesive, KC6402
$243.67

Part Number: KC6402 - (Size: 1600 X 1000 X 12mm). Glass Fiber Insulation Mat is a Self-Adhesive material that is very efficient and easy to use as an insulator on the exterior of a mold wall to prevent the build-up of resin in unwanted areas of a plastic part. It is easily cut with a knife to the desired size and shape and has a self- adhering feature that facilitates simple installation on the mold.

The reflective aluminum sheet and high thermal insulation quality of the glass fiber material make it the most efficient heat barrier available for the rotational molding process. The thermal resistance (R) of the 7m sheet is ≈ 0.35 (this is generally measured in m²K/W)

This system works excellent when cooling with air.

NOTE: It is not recommended for water spray cooling. Glass Fiber Insulation Mats are available from RotoMart in the following sizes: 1600 X 1000 X 3mm, Part Number KC6400, 1600 X 1000 X 7mm, Part Number KC6401.


more info