Home > Venting Products > Teflon™ Tubes
Sort By:
Page of 1
Tubes, Teflonâ„¢ Custom Cuts, KC5745
Tubes, Teflon™ Custom Cuts, KC5745
$0.75

$.75 price is per cut. Please specify the length of your tubes to be cut in the order comments section at checkout. more info
Tubes, Teflonâ„¢  .50" O.D. X .375" I.D. KC5750
Tubes, Teflon™ .50" O.D. X .375" I.D. KC5750
$6.25

Virgin Teflon™ Tubes for use as venting devices. .50 ” O.D. X .375” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material
more info
Tubes, Teflonâ„¢  1.375" O.D. X 1.125" I.D., KC5759
Tubes, Teflon™ 1.375" O.D. X 1.125" I.D., KC5759
$9.04

Virgin Teflon™ Tubes for use as venting devices. 1.375” O.D. X 1.125” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1” Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material

more info
Tubes, Teflonâ„¢ 1.50" O.D. X 1.125" I.D., KC5749
Tubes, Teflon™ 1.50" O.D. X 1.125" I.D., KC5749
$9.93

Virgin Teflon™ Tubes for use as venting devices. 1.50” O.D. X 1.125” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material
more info
Tubes, Teflonâ„¢ 1.25" O.D. X .875" I.D., KC5754
Tubes, Teflon™ 1.25" O.D. X .875" I.D., KC5754
$11.50

Virgin Teflon™ Tubes for use as venting devices. 1.25 O.D. X .875” I.D

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material


more info
Tubes, Teflonâ„¢ 1" O.D. X .875" I.D., KC5753
Tubes, Teflon™ 1" O.D. X .875" I.D., KC5753
$12.10

Virgin Teflon™ Tubes for use as venting devices. 1” O.D. X .875” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material


more info
Tubes, Teflonâ„¢ .75" O.D. X .50" I.D., KC5751
Tubes, Teflon™ .75" O.D. X .50" I.D., KC5751
$12.40

Virgin Teflon™ Tubes for use as venting devices. .75 ” O.D. X .50” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material



more info
Tubes, Teflonâ„¢ 1" O.D. X .75" I.D., KC5752
Tubes, Teflon™ 1" O.D. X .75" I.D., KC5752
$15.95

Virgin Teflon™ Tubes for use as venting devices. 1” O.D. X .75” I.D.

  • “Virgin” Tubes
  • For venting use in Rotational Molds
  • Used for a variety of venting needs
  • Sold in 1' Increments
  • Available in 6’ sections
  • PTFE
  • Custom cuts available (Please add custom cuts KC5745 to your order in accessories below one for every cut needed)
  • Price does not include any packing material


more info
Intellicutter, 3/4 inch, KC4052
Intellicutter, 3/4 inch, KC4052
$187.50

This cutter will allow you to cut our Teflon tube (KC5752) to accept the intellivent (KC401852). It cuts a recess into the Teflon about .200” deep.

Intellivent has been designed to fit inside an appropriately sized PTFE boss. The OD of the intellivent sits snugly on the ID of the Teflon tube. When fitting the intellivent, please make sure that the wedge of the Intellivent is sitting uniformly against the ID of the Teflon tube you are using. An incorrectly installed Intellivent may have folds or kinks in the wedge that may impact the performance. To improve the security of the Intellivent event, we recommend that you use one of our intellicutters to size and recess the vent tube that you are using.

For a 360° view of a line drawing of an intellicutter, please go to this website:
https://myhub.autodesk360.com/ue2daed1b/g/shares/SH9285eQTcf875d3c5398a62f987c25b7e5d

more info