Home > Mold Components > Snap-Serts, Stationary
Sort By:
Page of 2
Snap-Sert, Stationary, 10-24, KC5412K (Previously KC5412)
Snap-Sert, Stationary, 10-24, KC5412K (Previously KC5412)
$5.40

Snap-Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all-stainless steel Single detent ball construction. They fit the most common thread sizes. Due to variations in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your insert thread size: 10-24, Norstar's "Snap-Sert" thread size 6-32. Stationary Snap-Sert includes washer, pin, and nut.

Kit Includes:
KC5512 - 10-24 Stationary stainless steel detented pin
KC5325 - #6 Stainless steel flat washer
KC5270 - #6 stainless steel machine screw nut (6-32)

more info
Snap-Sert, Stationary, 10-32, KC5415K (Previously KC5415)
Snap-Sert, Stationary, 10-32, KC5415K (Previously KC5415)
$5.64

Snap Serts is a time-saving installation and release system for molded-in inserts. They are manufactured in an all-stainless steel Single detent ball construction. They fit the most common thread sizes. Due to variations in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your insert thread size: 10-32, Norstar's "Snap Sert" thread size: 6-32). Stationary Snap Sert includes a washer, pin, and nut.

Kit Includes:

KC5515 - 10-32 Stationary stainless steel detented pin
KC5325 - #6 Stainless steel flat washer
KC5270 - #6 Stainless steel machine screw nut (6-32)
more info
Snap-Sert, Stationary, 5mm, KC5418K (Previously KC5418)
Snap-Sert, Stationary, 5mm, KC5418K (Previously KC5418)
$5.65

Snap-Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all stainless steel Single detent ball construction. They fit most common thread sizes. Due to variation in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your insert thread size 5mm, Norstar's "Snap-Sert" thread size m4 X 0.7). Stationary Snap-Sert includes washer, pin, and nut.

Kit Includes:

KC5518 - 5mm Stationary stainless steel detented pin
KC5240 - 4mm Hex nut, 304 stainless steel (machine nut)
KC5335 - 4mm Stainless steel flat washer
more info
Snap-Sert, Stationary, 6mm, KC5421K (Previously KC5421)
Snap-Sert, Stationary, 6mm, KC5421K (Previously KC5421)
$5.72

Snap Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all stainless steel single detent ball construction. They fit most common thread sizes. Due to variation in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your insert thread size 6mm, Norstar's "Snap Sert" thread size m5 X 0.8). Stationary Snap Sert includes washer, pin, and nut.

Kit Includes:

KC5521 - 6mm Stationary stainless steel detented pin drawing
KC5245 - 5mm Hex nut, 304 stainless steel (.08 thread pitch)
KC5330 - #10 Stainless steel flat washer
more info
Snap-Sert, Stationary 1/4-20, KC5400K (Previously KC5400)
Snap-Sert, Stationary 1/4-20, KC5400K (Previously KC5400)
$6.21

Snap-Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all-stainless steel single-detented ball construction. They fit the most common thread sizes. Due to variations in inserts, you may wish to send a sample insert with your order for proper fitting.

Kit Includes:
KC5500 - 1/4-20 Stationary stainless steel detented pin drawing
KC5330 - #10 Stainless steel flat washer
KC5270 - #6 Stainless steel machine screw nut

(Your Insert thread size: 1/4-20, Norstar's "Snap-Sert" thread size: 10-32). Stationary Snap-Sert includes a washer, pin, and nut.

more info
Snap-Sert, Stationary, Double Detent, 6mm, KC5522
Snap-Sert, Stationary, Double Detent, 6mm, KC5522
$7.00

6mm Stainless Steel Double Detent Snap-Serts are timesaving installation and release systems for molded-in inserts. All stainless steel construction. These Snap Serts are designed for maximum holding force for difficult to hold and heavier inserts. Comes with nut and washer.

Your insert thread size 6mm, Norstar's "Snap Sert" thread size is 5mm. Stationary Snap Sert includes washer (KC5330), pin, and nut (KC5245).

more info
Snap-Sert, Stationary 5/16-18, KC5403K (Previously KC5403)
Snap-Sert, Stationary 5/16-18, KC5403K (Previously KC5403)
$7.40

Snap-Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all stainless steel single detent ball construction. They fit most common thread sizes. Due to variation in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your Insert thread size: 5/16-18, Norstar's "Snap-Sert" thread size: 1/4-20). Stationary Snap-Sert includes washer, pin, and nut.

Kit Includes:
KC5503 - 5/16-18 Stationary stainless steel detented pin
KC5345 - 6mm Stainless steel flat washer
KC5200 - 1/4-20 Stainless steel jam nut, plain

more info
Snap-Sert, Stationary, Stainless Steel, Double Detent, 5/16-18, KC5520
Snap-Sert, Stationary, Stainless Steel, Double Detent, 5/16-18, KC5520
$7.52

5/16-18 Stainless Steel Double Detent Stationary Snap-Serts are time-saving installation and release systems for molded-in inserts. All stainless steel construction.These Snap Serts are designed for maximum holding force for difficult to hold and heavier inserts.

(Your insert thread size 5/16-18, Norstar's "Snap Sert" Thread size 1/4-20). Stationary Snap Sert includes washer (KC5345), pin, and nut (KC5200).

Dimensions:
overall length: 1.6"
thread length: 1.2"
with out thread (holding double detents): .4"

more info
Snap-Sert, Stationary, 8mm, KC5424K (Previously KC5424)
Snap-Sert, Stationary, 8mm, KC5424K (Previously KC5424)
$7.71

Snap Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all stainless steel single detent ball construction. They fit most common thread sizes. Due to variation in inserts, you may wish to send a sample insert with your order for proper fitting. (Your insert thread size 8mm, Norstar's "Snap Sert" thread size m6 X 1.0). Stationary Snap Sert includes washer, pin, and nut.

Kit Includes:

KC5250 - 6mm Hex nut, 304 stainless steel (1.0 thread pitch)
KC5345 - 6mm Stainless steel flat washer
KC5525 - 8mm Dbl detent stainless steel pin, threaded drawing.#rm-1341
more info
Snap-Sert, Stationary 10mm, KC5427K (Previously KC5427)
Snap-Sert, Stationary 10mm, KC5427K (Previously KC5427)
$7.80

Snap-Serts are a time-saving installation and release system for molded-in inserts. They are manufactured in an all stainless steel single detent ball construction. They fit most common thread sizes. Due to variation in inserts, you may wish to send a sample insert with your order for proper fitting.

(Your insert thread size 10mm, Norstar's "snap sert" thread size m8 X 1.25). Stationary Snap Sert includes washer, pin, and nut.

Kit Includes:
KC5527 - 10mm Stationary s.s., single detent drawing. rm-1012 rev.2
KC5255 - 8mm Stainless steel hex nut
KC5350 - 8mm Stainless steel flat washer

more info